dd ' h',h, , dd dd This machine has the advantages of high efficiency, energy saving, safety and hygiene, no edge waste, variable size and thickness, etc. It makes the appearance, taste and weight of the dumpling skins produced achieve spatial uniformity, thus completely changing the current situation. Low production efficiency, employee waste, secondary pollution, cracks in the middle, etc. In addition to the above advantages, this imitation handmade dumpling wrapper machine can also change the peeling speed according to production needs.
, dd dd, roller arrangement, chain sprocket transmission, easy maintenance.
, dd dd, automatic skin feeding, automatic forming, automatic skin returning.
, , roller drawing, uniform feeding, neat panels, saving labor.
dd , dd , ) dd dd dd Notes
dd , dd dd Fasten each component and install it flat and stable.
dd, dd dd The operator must wear button-sleeved overalls and cannot extend his hands into the hopper.
dd, dd dd Hard impurities in the flour must be removed.
dd, dd dd Motor oil cannot replace cooking oil.
dd , dd dd The dough machine rotates clockwise to prevent reverse rotation. Only after all preparations for test run and operation are ready can the power be turned on. When starting the power, the car will run empty for a few minutes, then stop and check if there are any abnormalities. Only when everything is normal can formal production be carried out. The continuity of material supply must be ensured during the production process. The dough sheet sticking to the roller is caused by the dough being too powdery or the scraper bolts being loose. If the machine is not used for a long time, it should be wiped clean and coated with cooking oil.
dd, common faults and repairs
dd, ,
dd ' h',h, > dd > dumpling wrapper machine
dd panel cannot be connected normally< dd /> Cause of failure: This situation is generally due to the improper gap between the two sets of upper and lower rollers of the dumpling wrapper machine, resulting in broken or remaining boards. < dd /> Solution: When the plate is broken, reduce the gap between the lower set of rollers, or increase the gap between the upper set of rollers. The adjustment method of the remaining plate is just opposite to that of the broken plate. < dd />, dough sheet deviation, inconsistent thickness< dd /> Cause of failure: This situation is usually caused by uneven gaps in the length direction of the rollers. < dd /> Solution: Properly adjust the adjustment wire on the dough roller of the dumpling wrapper machine until it is suitable. < dd /> , The edge of the dough piece is incomplete < dd /> Cause of failure: Usually the edge of the dough piece is incomplete due to uneven feeding. < dd /> Solution: Just maintain continuous and even feeding when feeding the dough. < dd /> ,
dd >Dumpling wrapper machine
dd dough roller sticks to the dough< dd /> Cause of failure: The dough roller sticks to the dough generally due to poor contact of the scraper. < dd /> Solution: It is suitable to adjust the blade position of the dumpling wrapper machine scraper. < dd /> , the dough piece has a curved wave shape < dd /> Cause of failure: This situation is usually caused by the angle between the roller and the scraper being too large, or it may be that the scraper is reversed or the blade is blunt. < dd /> Solution: Check whether the installation angle of the scraper of the dd dd dumpling wrapper machine is appropriate. Check whether the scraper is reversed. Install the scraper correctly and check whether the blade is too blunt. If < dd /> is blunt, sharpen the blade. It can be solved after installation.
, , General Manager: Manager Zhao Mobile Phone
, , Sales Department 1: Manager Xia Phone: WeChat
, , Sales Department 2: Manager Mu Phone: Mobile: WeChat
, , Sales Department 3: Manager Zhang Telephone: Mobile: WeChat: h
, , Sales Department 4: Manager Wang Telephone: Mobile: WeChat
, Sales Department 5: Manager Ma Telephone: Mobile: WeChat:z< br/>
Beijing double row dumpling wrapper machine manufacturer supplies reasonable prices